Flying-Hobby
CF TAIL PUSHROD
Suitable Model :,
EP-200 V2-SE EP-200 V2-FES EP-200 V2 Kit EP-200 EP-200 SD?Flying-Hobby
FUTABA MAGNETIC ROTATION SENSOR FOR 18MZ TELEMETRY SYSTEM
| INCLUDES | Two screws |
| SPECS | Length |
| Weight | 0.16oz (4.7g) |
| Voltage | DC 3.7-7.4V |
| Ramge | 37 to approximately 100,000RPM |
FEATURES:, This sensor provides the RPM of a motor to the Futaba 18MZ transmitter,
Futaba Magnetic rotation sensor for 18MZ telemetry system This is ...Flying-Hobby
FUTABA BLS172SV SBUS2 HV ULTRA TORQ PROGRAMMABLE SERVO
| Torque | 514 oz-in (37 kg-cm) @ 7.4V |
| Speed | 0.11 sec/60° @ 7.4V |
| Dimensions | 1-9/16 x 13/16 x 1-1/2" (41 x 21 x 38mm) |
| Weight | 2.6 oz (74 g) |
FEATURES:, Brushless motor offers incredible holding power and 5X longer life than servos equipped with brushed motors Ultra high torque Handles up to 2S LiPo power Programmable and compatible with S.Bus and S.Bus2 Dual ball bearing supported output shaft Aluminum center case One year limited warranty through Hobby Services beginning at date of purchase, INCLUDES:, HV BLS172SV UHT S.Bus2 Servo with Instructions 0.83" (21mm) Round Horn 1.8" (45mm) Round Horn 1.5" (39mm) Four Point Horn 1.2" (32mm) Six Point Horn Four each, Grommets, Eyelets and Mounting Screws, SPECS:,
Flying-Hobby
FUTABA R2008SB 8-CH 2.4GHZ S-FHSS RECEIVER (FOR AIRPLANE TX)
| • Modes | S-FHSS or FHSS |
| • Voltage Input | 4.8V-7.4V battery or regulated output from ESC |
| • Compatible Batteries | NiCd, NiMH, LiPo, LiIon or LiFe |
| • Dimensions | 0.98 x 1.69 x 0.55 in (24.9 x 42.8 x 14.0 mm) |
| • Weight | 0.34 oz (9.5 g) |
Product description :, , :, • For aircraft models, :, :, • R2008SB 2.4GHz S.Bus S-FHSS 8 Channel Receiver with Instruction Sheet,
Features • Dual Antenna Diversity • High voltage operation (4.8 ...Flying-Hobby
HEXAGON 2.5X6MM
Specification :, - 2.5x6 mm 2pcs, usage:, - used for 450 size heli motor such as Align 450M,
CommonFlying-Hobby
450-500 NEW SWASHPLATE REGULATOR / SILVER
Product description:, 6061-T6 aluminum CNC precision machining, suitable for 450/500 spindle diameter 5MM/500MM each series models,, Specifications:, CCPM Metal Swashplate the seat * 1,
the new independent design rubber ring positioning ease of use. ...Flying-Hobby
450-500 NEW SWASHPLATE REGULATOR / ORANGE
Product description:, 6061-T6 aluminum CNC precision machining, suitable for 450/500 spindle diameter 5MM/500MM each series models, the new independent design rubber ring positioning ease of use., Specifications:, CCPM Metal Swashplate the seat * 1,
Precise adjustment of the swashplate level, the assisted lift helicopter ...Flying-Hobby
MAXWELL-MX306BB SERVO (HIGH SPEED)
| Weight | 6.6 grams / 0.23oz. |
| Dimensions | 22 x 10 x 23 mm / 0.86 x 0.4 x 0.9 inch |
| Torque At 4.8V | 0.8kg/cm , 12 oz/in |
| Speed At 4.8V | 0.10 sec / 60 deg at no load |
| Motor Type | 3 pole magnetic motor |
Flying-Hobby
RJX FS-0435HV DIGITAL MICRO SIZE SERVO
| Operation Voltage | 6-7.4V |
| Weight | 20g (0.71oz) |
| Torque | 2.2 (kg/cm)@4.8V |
| Speed | 0.04 (sec/60° )@7.4V |
| Frequency / Pulse | 1520us/333hz |
| Gear Type | Titanium Gears |
| Motor Type | Coreless Motor |
Technical Data :,
2.8 (kg/cm)@6V 3.4 (kg/cm)@7.4V 0.05 (sec/60° )@6V 0.06 (sec/60° )@4.8VFlying-Hobby
FUTABA DIGITAL SERVO S9650
| Control System | +Pulse Width Control 1520usec Neutral |
| Required Pulse | 3-5 Volt Peak to Peak Square Wave |
| Operating Voltage | 4.8-6.0 Volts |
| Operating Temperature Range | -20 to +60 Degree C |
| Operating Speed (4.8V) | 0.14sec/60 degrees at no load |
| Operating Speed (6.0V) | 0.11sec/60 degrees at no load |
| Stall Torque (4.8V) | 50 oz/in. (3.6kg.cm) |
| Stall Torque (6.0V) | 62.5 oz/in. (4.5kg.cm) |
| Operating Angle | 45 Deg. one side pulse traveling 400usec |
| 360 Modifiable | Yes |
| Direction | Counter Clockwise/Pulse Traveling 1520-1900usec |
| Motor Type | Coreless Motor |
| Potentiometer Drive | Indirect Drive |
| Bearing Type | Dual Ball Bearings |
| Gear Type | All Nylon Gears |
| Connector Wire Length | 12" |
| Dimensions | (43 x 15 x 28.6mm) |
| Weight | .92oz. (26g) |
Flying-Hobby
FUTABA BLS257 BRUSHLESS HELI RUDDER MINI SERVO
| Torque | 36 oz-in. (2.6 kg-cm) @ 4.8V Speed |
| Weight | 0.92 oz (26g) |
FEATURES:, Designed for 3D helis 30% faster response than standard digital servos and five times longer lasting than servos with brushed motors Same power consumption as brushed digital servos One year limited warranty through manufacturer beginning at date of purchase, INCLUDES:, Futaba BLS257 Brushless Heli Rudder Mini Digital Servo with universal connector,, REQUIRES:, Installing in heli, connecting linkage and connecting to receiver, SPECS:,
This is the Futaba BLS257 Brushless Rudder Mini Digital Servo. ...Flying-Hobby
JR DS3500G ULTRA SPEED MINI GYRO SERVO
| Size Category | Specialty |
| Type | Digital |
| Torque | 27 oz/in |
| Speed | .07 sec/60 degrees |
| Dimensions (WxLxH) | .58"x1.05"x1.3" |
| Weight | .9 oz |
| Bushing Or Bearing | Bearing |
| Motor Type | Coreless |
| Gear Type | Nylon |
| Application | Mini Heli Tail Rotor |
Connector Type:JR,
Key Features Ultra-Speed Servo for Instant Tail Control Reaction Ultra ...